Export to Logbook

The points that are grouped/selected will be exported to the logbook.

If you are going to use a new logbook (the current logbook is shown in the dialog header), first go to Setup...

Procedure

1. Click Raw Data File... to select the name of the raw data file. The file name will then be written below the button.
   • *.raw = raw data file
   • *.gsi = Leica PCMCIA/GIF12 raw data file. The file is already established and is retrieved from the PCMCIA card
   • *.kof = Kof file
   • *.pto/ptc = Pumatec files
2. Click Create Raw Data to generate the raw data file.
3. Click Edit... to edit the raw data file (this should normally not be necessary).
4. Click Transfer Raw Data to write the data to the logbook.

Note

For all logbooks, only coordinates are transferred. However, for the KOF format, you can also include the observations. A question about this will appear when you create the raw data file.